Douglas DC4-6 Panel.

This panel is a modification of the original panel produced
by Petros Protopapas & Stephen Grille and later modified by
Tom Gibson.

I have spent a little time cleaning up the BMP to remove the jagged
edges, and arranged the instrument as close as possible as they would
have been in early DC4/6 aircraft.

I have only include VOR.1 and the ADF as this is in fact probably more
navigational instruments than the pilots of that day would have had to
find their way around. On the Nav panel both No1 & 2 VOR tuner have been
included so that both can be used for DME readouts.

There are three additional panels included, the first an overhead radio/nav
autopilot panel, the second an engine panel and the third the Minicontrols
These can be accessed using the Shift + 2, + 3 & + 4 key combination
The Minicontrols are helpful if you find the Engine Tachometers (RPM Gauges)
readings are erratic. Bringing up the minicontrols seems, to fix the problem.

The Manifold Pressure Gauge Bitmaps have been redone so that more realistic
engine RPM/MAP settings can be set for Takeoff, Climb and Cruise.

I would like to thank all those Flight Sim panel and gauge modifiers who have
provided both the Bitmap and gauges that has allowed this panel creation.


This panel is freeware for all to enjoy, and must not be uploaded
to any site or situation that places a charge for the service.

Hope you all enjoy the flight

Brian Horsey
Brisbane.
Australia.

horse@powerup.com.au